G.Skill F4-3200C16S-8GTZR 8GB (1 x 8GB) DDR4 3200MHz CL16 Trident Z RGB Memory

Memory Type

DDR4    

Capacity

8GB (1x8GB)

Multi-Channel Kit

Single Channel Kit           

OC Profile Support

Intel XMP 2.0    

Tested Speed (Up To) (XMP)

3200 MT/s         

Tested Latency (XMP)

16-18-18-38

Tested Voltage (XMP)

1.35V   

Registered/Unbuffered

Unbuffered        

Error Checking (ECC)

Non-ECC             

SPD Speed (Default)

2133 MT/s         

SPD Voltage (Default)

1.20V   

Fan Included

No         

Features

Intel XMP 2.0 (Extreme Memory Profile) Ready  

Additional Notes

• If used with 11th Gen Intel Core processors, 10th Gen Intel Core non-K processors, or AMD Ryzen processors, DDR4-3000 is not supported, so memory frequency may be limited to DDR4-2933 or lower when XMP is enabled.
• Do not mix memory kits. Memory kits are sold in matched kits that are designed to run together as a set. Mixing memory kits will result in stability issues or system failure.
• Prior to enabling XMP, memory kits will boot at the SPD speed at default BIOS settings with compatible hardware.
• For memory kits with XMP, enable XMP/DOCP/A-XMP profile in BIOS to reach up to the rated potential XMP overclock speed of the memory kit, subject to the use of compatible hardware. Enabling XMP is an act of overclocking and requires BIOS        setting adjustments. Please refer to the "How to Enable XMP/EXPO" guide.
• Reaching the rated XMP overclock speed and system stability will depend on the compatibility and capability of the motherboard and CPU used.
• Usage in any manner inconsistent with manufacturer specifications, warnings, designs, or recommendations will result in lower speeds, system instability, or damage to the system or its components.
• Memory module height can be found in the FAQ, under the question "How tall are the memory modules?".
• For product support and related questions, please contact the G.SKILL technical support team via email.