PowerShield Defender 1600VA Line Interactive Tower PSU PSD1600
Model
PSD1600
| Location | Availability |
|---|---|
Online (Delivery) | Available from Supplier (2 to 3 Working Days) |
Notting Hill (Pickup) | Available from Supplier (2 to 3 Working Days) |
Preston (Pickup) | Available from Supplier (2 to 3 Working Days) |
West Melbourne (Pickup) | Available from Supplier (2 to 3 Working Days) |
$349.00
PowerShield Defender 1600VA Line Interactive Tower PSU - PSD1600
Power Shield Defender protects equiptment such as computers, camera surveillance, telephones and other electrical products.
Key Selling Points
- Excellent microprocessor control guarantees high reliability
- Australian outlets for UPS Protection (x3)
- ustralian outlets for Surge protection (x3)
- Boost and buck AVR for voltage stabilization
- User replaceable batteries
- Silent Operation (No fans included)
- Auto restart while AC is recovering
- Off-mode charging
- Cold start function
- USB communication with sophisticated NetGuard software
Main Specifications
| MODEL PSD1600 |
| CAPACITY 960 W |
| INPUT |
| Voltage (Nominal) 240 VAC (Australia) |
| Voltage Range 177-290 VAC |
| Frequency Range 50/60 Hz +/-5Hz (auto sensing) |
| OUTPUT |
| Output Voltage 240Vac Australia |
| Output Voltage Regulation 240Vac±10% |
| Frequency AC mode tracks utility. Battery Mode 50Hz+/-1% |
| Frequency Range (Batt. Mode) 50 Hz or 60 Hz ±1 Hz |
| Transfer Time Typical 2-6 ms, 10ms max. |
| Waveform (Batt. Mode) Simulated Sine Wave |
| Australian Outlets - UPS Protection 3 3 |
| Australian Outlets - Surge Protection 3 3 |
| BATTERY |
| Battery Type & Number 12V*9AH (x2) |
| Backup Time (One PC load @ 120 W) 45 min. |
| Typical Recharge Time 4-6 hours recover to 90% capacity |
| PROTECTION |
| Full Protection Overload, discharge, and overcharge protection |
| Safety EN62040-1-1 2003, IEC60950-1:2001 |
| EMC EN62040-2 2006 |
| COMMUNICATIONS & MANAGEMENT |
| USB interace PowerShield NetGuard Supports Windows®, Linux, Unix, and MAC |
| Smart LCD |
| AUDIBLE ALARM |
| Battery Mode 2 beeps every 30 secs |
| Low Battery Rapid Beep (one sec intervals) |
| Overload Constant Beeping |
| Battery Replacement Alarm Constant Beeping |
| Fault Constant Beeping |
| OPERATING ENVIRONMENT |
| Humidity 0-90 % RH @ 0-40°C (non-condensing) |
| Noise Level Less than 40dB |
| PHYSICAL |
| Dimension, D X W X H (mm) 397 x 146 x 205 |
| Net Weight (kgs) 11.1 11.5 |
Write Your Own Review
