Serveredge SEDG-2PSW-10A 2 Port Switched PDU (1) IEC C13 Output & (1) IEC C14 Input 10A 240V

Model
SEDG-2PSW-10A
LocationAvailability
Online (Delivery)
Available from Supplier (2 to 3 Working Days)
Notting Hill (Pickup)
Available from Supplier (2 to 3 Working Days)
Preston (Pickup)
Available from Supplier (2 to 3 Working Days)
West Melbourne (Pickup)
Available from Supplier (2 to 3 Working Days)
$469.00
Serveredge SEDG-2PSW-10A 2 Port Switched PDU (1) IEC C13 Output & (1) IEC C14 Input 10A 240V

The Serveredge switched PDU enables the user to control and monitor the power remotely. The web based interface allows the user switch on/off functionality for power cycling of connected equipment remotely on each individual C13 Output Port. It allows for a user defined alarm threshold for overloads and warnings.

 

PRODUCT FEATURE 


 

* Remote power management (Power cycling/ Monitoring) of connected equipment
* Full-featured network management interface via Http, Https, SNMP, DHCP, UDP protocols
* Allows user with Individual outlet control for remote switch on/off (power cycling)
* Capable of Total Remote Power Monitoring by Meter, Web, SNMP
* Supports user defined alarm threshold for overloads and warnings raised by sending emails, and traps information in case of a threshold breach.
* Email, Trap, Audible Alarm can be set up by user as alarms
* Compliant with CE, C-tick, FCC and RoHS
* Warranty: 2 Years

 


 WARNING: It is recommended that no more than one device be power on each output port, not complying with this recommendation may result in a void of warranty.


 

PRODUCT SPECIFICATION


 

General

Output IEC320 C13 x 2
Input

IEC320 C14 Inlet x 1;
Enclosed IEC320 C13 to C14 Power Cord
1.8 Meters long

Reset

To reset the system back to default, press
and hold the reset button and release it after
the Signal LED flashed 6 times.

Default IP 192.168.0.200
MAC Address 00:06:18:75:38:1E

 

Communication

Reset Indication Yellow LED x 1
Power Status Red LED x 1
Output Status Green LED x 1
Network RJ45 for Ethernet x 1 

 

Operation

Nominal Voltage 230V
Voltage 200V~240V full range
Frequency 50/60Hz full range
Max. Output Current 10 Amp
Temperature 0 ~ 40 Celsius degree
Humidity 0% ~ 90%
Size (mm) 120 x 100 x 40
Weight (kg) 0.8

 

 

PACKAGING INCLUDES


 

SEDG-1PSW-10A 1
Free Bundled Software 1
User Manual 1
More Information
GTIN9350784005465
Write Your Own Review
You're reviewing:Serveredge SEDG-2PSW-10A 2 Port Switched PDU (1) IEC C13 Output & (1) IEC C14 Input 10A 240V