Synology E10M20-T1 10Gbe & M.2 SSD Adapter Card supporting and only.

Synology E10M20-T1 helps you boost I/O performance and network bandwidth simultaneously using just one PCIe expansion slot on your Synology NAS.

• Achieve Multi-Gig Ethernet transmission speeds of up to 10 Gbps.

  

• Accelerate random I/O performance with the dual M.2 2280/22110 NVMe SSD slots.

  

   

   

  Free up primary drive bays for data storage.

  

   

   

   

  Hardware Specifications
  General	Host Bus Interface	PCIe 3.0 x8
  	Bracket Height	Low Profile and Full Height
  	Size (Height x Width x Depth)	71.75 mm x 200.05 mm x 17.70 mm
  	Operating Temperature	0°C to 40°C (32°F to 104°F)
  	Storage Temperature	-20°C to 60°C (-5°F to 140°F)
  	Relative Humidity	5% to 95% RH
  	Warranty	5 Years
  	Notes	The warranty period starts from the purchase date as stated on your purchase receipt.
  Storage	Storage Interface	PCIe NVMe
  	Supported Form Factor	22110 / 2280
  	Connector Type and Quantity	M-key, 2 Slots
  Network	IEEE Specification Compliance	IEEE 802.3an 10Gbps Ethernet IEEE 802.3bz 2.5Gbps / 5Gbps Ethernet IEEE 802.3ab Gigabit Ethernet IEEE 802.3u Fast Ethernet IEEE 802.3x Flow Control
  	Data Transfer Rates	10 Gbps
  	Network Operation Mode	Full Duplex
  	Supported Features	9 KB Jumbo Frame TCP/UDP/IP Checksum Offloading Auto-negotiation between 100Mb/s, 1Gb/s, 2.5Gb/s, 5Gb/s, and 10Gb/s
  Compatibility
  Applied Models	NVMe SSD	SA series:SA3600, SA3400 20 series:RS820RP+, RS820+ 19 series:DS2419+, DS1819+ 18 series:RS2818RP+, DS3018xs, DS1618+
  	Notes	DSM version requirement: 6.2.3-25426 or later version